Code: CMR-K11

AVONGARD - Crack Movement Recorder Kit (Wireless)

In stock
Have a Question about this product?

Some of our products may require solutions, reagents or other add-ons.

Enquire about this product

Fill in your details, and we will contact you as you as soon as possible

Description

Continuous Monitoring (Data logging)

The Avongard Crack Movement Recorder is a weatherproof, high precision data logger that allows continuous monitoring of movement in crack width and temperature. It can be used in a wide range of environments, both indoors and outdoors and is ideal for use in areas difficult to access regularly.

The Wireless Crack Movement Recorder provides continuous recording of both movement in crack width and ambient temperature. The unit is configurable to measure at a pre-defined interval of 1 minute to 91 hours. The built in data logger stores readings for later download wirelessly onto a PC from a range of up to 150m. This kit contains everything required (except from the PC) to set up a monitoring system. Further units can be purchased individually to extend the system.

The unit is powered by a user-replaceable battery, which should last between six months and five years, depending on how the unit is configured and frequency of downloads. The measurements are stored in internal memory and are downloaded to a Windows PC using a USB Communications Module (one is required and available separately). One Communications Module can be used to connect to up to sixteen Crack Movement Recorders.

Monitoring in two dimensions using two units (normally horizontal and vertical) is explained in the manual.

The unit is supplied with a Wireless Communication Module, fixings and a link to download the latest version of the user guide and software.

 

Specifications

Movement Sensor

Range: 80mm (extension cables are available)

Resolution: 0.003mm

Linearity: 0.07% full scale

Temperature Sensor

Range:-20C - +80C

Resolution:1C

Data Logger

Capacity: 31926 Readings (15963 readings with redundancy)

Wireless

Frequency: 915MHz (Australia)

Range: 150m in free space

Electrical

Power Supply: 3.6v 1/2AA Battery

Mechanical

Working Temperature: 35C - +85C (or according to installed battery)

Cable Tension: 10N

Protection Rating: IP65

Mass: 200g

System Requirements:

The software requires Windows XP or later